Fiat Panda Cross to be unveiled at the Geneva Motor Show

The all-new FIAT Panda Cross is set to make its world début at the Geneva Motor Show on March 4th, 2014.  Building on the successful formula of the FIAT Panda 4X4, a car that’s as happy in city traffic as it is taking on the toughest off-road conditions, the new Panda Cross offers even more all-terrain capability thanks to a host of new features, better performance and improved ground clearance.

Key to the additional off-road ability of the FIAT Panda Cross is its standard ‘Torque-on-Demand’ transmission system, which utilises the vehicle’s ELD (Electronic Locking Differential) and advanced ESC (Electronic Stability Control) systems to manage the engine’s torque delivery in difficult driving conditions. The advantages of this system are that it is both fully automatic and requires zero maintenance and it is controlled by the new Terrain Control selector, which offers the driver three driving modes depending on the driving situation:

AUTO – Automatic distribution of drive between the front and rear axles in accordance with the available grip
LOCK – 4WD is optimised for off-road use at speeds of up to 30mph, with distribution of torque controlled by braking slipping wheels and thus transferring the drive to those with the most grip
HILL DESCENT – For optimum handling of particularly steep hill descents or when driving down extremely bumpy laneways
In addition, the FIAT Panda Cross is also fitted with oversized all-season 185/65R15 tyres, larger than those fitted to the standard Panda 4x4, which were developed specifically to combine drivability and traction in low-traction situations with positive on-road handling on both wet and dry surfaces.

The suspension of the FIAT Panda Cross has been developed to combine on-road comfort, handling, road-holding and safety with improved off-road characteristics. An independent MacPherson suspension is employed at the front while a torsion beam layout has been developed for the rear to accommodate the all-wheel drive mechanicals, thereby saving weight and providing better ride and acoustic characteristics than the semi-trailing arm arrangement of the previous generation Panda Cross.

In addition to its generous ground clearance – 16cm for the MultiJet II version and 15cm for the TwinAir Turbo version – the FIAT Panda Cross also benefits from improved approach and departure angles: Its 24° approach angle represents a three degree improvement over the previous model, while its 33° departure angle represents an improvement of one degree. The new FIAT Panda Cross also boasts a break-over angle of 20° and a 31.5° (70%) climbable gradient.

Two engines will be offered in the new FIAT Panda Cross, both with Start&Stop as standard and both offering a five horsepower boost compared to the standard FIAT Panda 4X4.  The new 0.9 TwinAir Turbo engine now produces 90hp at 5,500 rpm and 145Nm (107 lb ft) of torque between 1,900rpm and 3,000rpm, or 100Nm (74 lb ft) at 2,000 rpm in ‘Eco’ mode. This engine, on the combined cycle, offers an impressive fuel consumption figure of 57.6mpg and CO2 emissions of 114g/km, and comes equipped with a six-speed manual transmission with a unique first-gear ratio that was specifically engineered with off-road driving in mind.

The 1.3 MultiJet II turbo-diesel delivers a maximum power output of 80hp at 4,000rpm and generous 190Nm (140 lb ft) of torque at just 1,500 rpm but thanks to its low weight of just 140kg there are no ride or handling compromises, on or off road. On the combined cycle, the 1.3 MultiJet II engine returns 60.1mpg and its CO2emissions are just 125g/km.

Styling-wise, every detail of the Panda Cross has been designed to make it immediately recognisable and distinctive: The front end features new light clusters, a new bumper and new fog lights integrated into front facia. New LED DRLs are also built into the skid plate, which is finished in a satin titanium colour with perforations that recall the Panda’s signature “squircle” motif.

From the side, wheel arch extensions, side mouldings with the ‘Cross’ logo and new roof bars with a satin titanium finish set the FIAT Panda Cross apart from its siblings, while its new 15-inch alloy wheels sport a five-spoke V design and a burnished metal finish. The rear end is also revised with a new bumper with under-body protection, echoing the design of the front skid plate, a new rear light cluster and a chrome tail pipe.  Finally, new tow hooks finished in brilliant red emphasise the off-road character and complete the look of the new Panda Cross.

Inside, the new Panda Cross features unique fabric/eco-leather upholstery and a new dashboard finish with a distinctive copper fascia, while standard equipment includes a leather-trimmed steering wheel with remote controls; a leather-trimmed gear knob; automatic climate control; Blue&Me™ connectivity; electric door mirrors; a height-adjustable driver's seat and, of course, the new Terrain Control selector. City Brake Control, which has won FIAT recognition in the 'Euro NCAP Advanced 2013’ awards, is available as an option. The innovative system recognises the presence of other vehicles or obstacles in front of the car, braking automatically if the driver fails to intervene directly to avoid a collision or mitigate its consequences at speeds of up to 18.6mph.