Volkswagen Unveils 'Design Vision GTI' Race Car at Worthersee

Following its tradition of showcasing future concepts at the Worthersee Festival, German auto major Volkswagen has now put up the race car 'Design Vision GTI' at the event, which promises to produce 503bhp. The striking "Design Vision GTI" is based on the seventh-generation GTI. The design team, led by Klaus Bischoff (Head of Design of Volkswagen Brand), has drawn the C-pillars and sills outward as autonomous body elements, thus creating space for substantially wider front and rear tracks, as well as specially developed 20-inch wheels (with 235 tires in the front and 275s at the rear). The "Design Vision GTI" can reach a top speed of 300kmph and looks as if it could start racing tomorrow.

Although the new GTI has plenty of power in standard form, with up to 230bhp available on the Performance model, the "Design Vision GTI" ups the ante with 503bhp, developed at 6500rpm. Just like the engine in the regular GTI, the concept car has a turbocharged and direct - injection TSI engine -- in this case, a 3.0-liter V6 instead of a 2.0-litre four cylinder, using twin turbochargers. Two three-way catalytic converters are arranged close to the engine to optimize emissions behavior. The V6 TSI develops 369 pound-feet of torque from as low as 2000rpm, with a maximum figure of 560Nm at 4000rpm.

All this power and torque is distributed to the wheels via a DSG® dual-clutch automatic transmission and an all-wheel-drive system. With this powertrain and a specially tuned chassis, the "Design Vision GTI" eats any type of racetrack. On a dragstrip, it will reach 100kmph from a standstill in an impressive 3.9 seconds

In order to slow this super-powerful GTI, Volkswagen fitted it with large carbon-ceramic brake discs, sized 15.0 inches up front and 14.0 inches at the back. The ceramic brake discs and red-painted brake calipers peek through the spokes of the 20-inch alloy wheels, which are 8.5J wide at the front and 9.5J at the back. The "Design Vision GTI" wheels, derived from the "Austin" GTI design, feature integrated blades that are designed to vent hot brake gas through the wheel openings. The wheel bolts are covered to give the appearance of a center-lock design.

Explaing the design of the car Klaus Bischoff says, "Our claim to be a global player is enhanced with our universal design language. A design that immediately communicates the brand's identity is central for all models that carry the VW logo, with elements that allow each model to be recognized as a true Volkswagen by its distinctive design."

Developing a show car for the GTI meeting at Wörthersee is always a great opportunity to package extreme ideas and a lot of emotion. Klaus Bischoff says: "The design team's brief was to give a spectacular glance into the future of the GTI." Marc Lichte, Andreas Mindt, and Philipp Römers, the same team who developed the latest Golf and the new GTI, also collaborated in the development of the "Design Vision GTI", breathing the charisma of a race car into the concept.

The C-pillar, which has always been a distinctive Golf and GTI feature, is drawn outward as an autonomous design element, while the main part of the body narrows strongly towards the rear. This process starts right behind the front wheel with a vertical air outlet that emphasizes the waisted doors. In parallel to that, the sill grows continually outward until its upper edge merges with the C pillar -- a styling device that gives this GTI a very dramatic look.

The GTI concept's front end is similarly sculptural. The radiator grille, the bottom air inlet, and the brake cooling vents are combined with the headlights and framed by the front fenders and the hood. The precision and straightforwardness of the lines follow the Volkswagen design DNA. The grille and air inlets -- although re-interpreted -- consciously underscore their relation to the production GTI's. The so-called "blades" are an especially prominent detail.

The GTI's typical red line divides the headlights of the "Design Vision GTI" horizontally. The actual lighting elements are set back, giving the "eyes" depth -- an innovative variation of the "evil eye" popular with GTI customizers. Like the front end, an all-round sharp edge is a consistent feature at the rear. The taillights straddle the space between the C-pillars and the rear deck, while the integrated rear spoiler has the same position as the production GTI's. At the bottom of the car, the dominant elements are the aerodynamically conceived ribs of the rear diffuser and the exhaust tips that frame the assembly.